In order to meet the needs of the technical investigation work of the public security departments and security departments, it is necessary to obtain accurate location information of mobile phone users in the designated area. On-board UAV IMSI Catcher is a mobile phone positioning product, which combines advanced technologies in the field of wireless communication, is a set of police equipment tailored to locate criminal suspects for the investigators from security departments.
The On-board UAV IMSI Catcher mainly uses wireless communication means to accurately locate the target mobile phone without affecting the user's normal communication, especially in densely populated cities and high-rise buildings, the role of this product is particularly prominent, and it is easy to carry and easy to operate. It combines with the related 2G/3G/4G wireless communication protocol, after obtaining the approximate location area of the target mobile phone, turns on the device to scan the nearby MNO’s network base stations to obtain its system parameters, and then configures its working environment according to the system parameters, and then enters the IMSI of the target phone into the target list through the APP.
It actively sends out signals, and lures nearby mobile phones to update the location to the IMSI Catcher. After searching for the IMSI of a single or multiple target mobile phone, the IMSI Catcher checks the user's signal strength by monitoring the uplink and downlink signals. Measures the strength of the wireless signal emitted by the target mobile phone, approaches the target phone according to the signal strength, and uses safe signaling to make the target mobile phone imperceptibly lured to the IMSI Catcher; then uses the Direction Finder to obtain the direction of the target mobile phone and accurately locks the actual location of the target mobile phone finally.
Direction Finder works with Portable IMSI Catcher together, it is an auxiliary device, and it supports 2G/3G/4 G. When the IMSI Catcher detects the target mobile phone and approaches to the target mobile phone, if the target mobile phone is inside a building, the IMSI Catcher keeps working outside, the Direction Finder can take the positioning mission, it can be configured to detect and display the field strength only from the target mobile phone, so the very clear field strength can be obtained, then the Direction Finder can infinitely approach to the target mobile phone according to the field strength.
THE DEVICE IS ONLY PROVIDED FOR USE BY ‘SPECIAL DEPARTMENTS AND COMPANIES OFFICIALLY AUTHORIZED BY LAW’, AND OTHER COMPANIES OR INDIVIDUALS ARE NOT ALLOWED TO INSTALL AND USE.THE DEVICE (S) WILL NOT BE USED TO CONCEAL OR OTHERWISE ASSIST CRIMINAL AND / OR TERRORIST ACTIVITIES.
Mobile Phone Detection, support IMSI collection function for mobile phones in all frequency bands
Positioning, the IMSI number is shown with red color on the supporting APP when the target is detected, and the target mobile phone can be approached according to the APP’s instructions. Precise positioning can be carried out with Direction finder
Scan and sync, support automatic scanning at startup, automatic air interface synchronization and GPS synchronization
Intelligent configuration, support automatically calculating frequency, PCI, TAC
Voice broadcast, the supporting APP can broadcast the field strength value by voice
Collision analysis, the supporting APP supports collision analysis
Items | Specifications | |
Working Frequency Range | 2G | B3(1800MHz)/B8(900MHz) |
3G | B1(2100MHz) | |
4G | B3(1800MHz) | |
System Standard | GSM/UMTS/FDD-LTE | |
Operators | All Operators | |
Working Mode | Active | |
Capacity | 4 Carriers(2*2G+1*3G+1*4G) | |
Max Output Power | 5W per Band | |
Adjustable Range | 0~10 dB with 1 dB step | |
Receiving Sensitivity | ≥-104dBm | |
Coverage Area | <300m(It Depends On the Environment) | |
Accuracy of Positioning | ||
Synchronization | GPS Synchronization, Air Interface Synchronization | |
Synchronization Precision | ≤ 0.1 ppm | |
RF Performance | Comply with 3GPP | |
RF Connector | 1*N Female for G900,1*N-Female for L1800&W2100 | |
Power Supply | DC48V | |
Temperature Range | -20°C ~ + 50°C | |
Relative Humidity Range | 0 ~ 95% (Non Condensing) | |
Application | Indoor (IP30) | |
Installation Type | On-board UAV |